BE YOU
PROFESSIONAL STARTER KIT
Professional Starter Kit es un kit imprescindible para realizar una manicura semipermanente por tu cuenta.
¡Contiene todos los productos necesarios para realizar una manicura de forma independiente y segura con un resultado profesional directamente en casa! Ideal para quienes deciden acercarse por primera vez al mundo del lacado semipermanente y necesitan todos los productos imprescindibles para una aplicación completa. Todos los productos contenidos en el Starter Kit están completamente libres de hema, lo que minimiza el riesgo de reacciones alérgicas.
01 - PREPARACIÓN DE UÑAS
Dale a la uña la forma que más te guste con ayuda de la Lima Cuticle Pusher con el lado de grano medio 180. Utilice el lado empujador redondeado de la misma lima de cutículas, ejerciendo ligeros movimientos abrasivos cerca de las cutículas para despegarlas con cuidado de la uña.
Matificar la uña con el Buffer en forma de media luna de grano bajo 220.
Limpiar la uña y eliminar las impurezas con el Cleanser, luego eliminar los restos aceitosos de la uña con Nail Prep - deshidratador de uñas. Secar al aire durante unos 30 segundos.
02 - BÁSICO
Extender una ligera capa de Ultra Bond - imprimación para uñas, teniendo cuidado de no tocar las cutículas, para permitir que los siguientes productos se adhieran perfectamente a la capa querátida.
Luego aplicar Base Coat, nuevamente evitando tocar las cutículas, y curar las uñas en la lámpara LED/UV durante 60 segundos.
Luego, con un algodón empapado en Cleanser, retirar la capa de dispersión para facilitar la posterior aplicación del color.
03 - COLOR
Elige tu color favorito entre la amplia gama de Gel Polish y aplica una capa fina y uniforme después de agitar bien el paquete, teniendo cuidado de no tocar las cutículas. Cure durante 120 segundos en lámpara UV o 90 segundos en lámpara LED.
Extiende una segunda capa de color para que selle la uña, especialmente en la punta. Polimerizar nuevamente durante 120 segundos en lámpara UV o 90 segundos en lámpara LED.
04 - ABRIGO SUPERIOR
Extiende el Top Coat sobre el color y cura durante 60 segundos. Déjelo enfriar al aire durante al menos un minuto, para evitar que se enrede, antes de retirar la última capa de dispersión con un algodón empapado en Cleanser.
Consejos: La capa base, el esmalte en gel y la capa superior se deben aplicar y curar primero en las uñas del pulgar. De lo contrario, debido a su posición lateral, los rayos UV no podrán alcanzarlos correctamente.
Recuerda no aplicar los productos sobre las cutículas para evitar que se formen burbujas de aire debajo del esmalte.
05 - CÓMO QUITAR EL ESMALTE DE UÑAS SEMIPERMANENTE
Para una eliminación óptima, primero retira la capa superior de esmalte de uñas semipermanente con la lima de uñas de grano medio-alto 100/180 para permitir que el solvente penetre y ayude a levantar el esmalte de uñas. Moja un algodón con Removedor y envuélvelo sobre la uña con papel de aluminio para que se adhiera bien. Déjalo actuar durante al menos 15 minutos. Termina de retirar el esmalte semipermanente con la Lima Buffer de grano medio-alto 100/180 y elimina cualquier residuo con la Lima Buffer de grano medio-bajo 180/220.
REMOVER
Acetone.
PaO: 24 M (125 ml)
Warnings: Inflammable product. Keep away from heat sources. Keep out of reach of children. External use.
How to use: For optimal removal, it is recommended to first remove the top layer of nail polish with a medium-high grit file in order to allow the solvent to penetrate and help the nail polish to lift. Wet a cotton ball with Remover and wrap it tightly around the nail with aluminium foil. Leave on for at least 15 minutes. Finish removing the semi-permanent nail polish with a cuticle pusher or a medium-high grit file and remove any residue with a medium-low grit buffer file.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
CLEANSER
Isopropyl alcohol, Ethyl acetate.
PaO: 24 M (125 ml)
Warnings: Inflammable product. Keep away from heat sources. Keep out of reach of children. External use.
How to use: Before applying the Base coat, apply the product on a cotton pad and gently rub it on the nail to remove powder residues and the lipid layer. Repeat the operation after polymerisation of the Base coat to remove the dispersion layer. As a final step, degrease the nail after polymerisation of the Top Coat for an excellent shine.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
TOP COAT
Bis-HEA Poly(1,4-butanediol)-22/IPDI Copolymer, Benzyl Methacrylate, Trimethylolpropane trimethacrylate, Ethyl trimethylbenzoyl phenylphosphinate, Hydroxycyclohexyl phenyl ketone, PEG/PPG-27/27 dimethicone.
PaO: 12 M (5 ml)
Warnings: Keep out of reach of children. Avoid contact with skin and eyes. May cause allergic skin reaction. Causes skin irritation. In case of adverse reaction discontinue use of the product. In case of contact with eyes, rinse immediately with water and seek medical advice. Do not swallow. If swallowed, do not induce vomiting but seek medical advice and show the product. Keep container well closed after use, in a suitable cool and dry place, away from sources of artificial or direct sunlight and away from heat sources.
How to use: Apply the product over the colour, taking care not to touch skin and cuticles, then polymerise for 120 seconds in an LED/UV lamp.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
BASE COAT
Polyurethane-57, Benzyl Methacrylate, Isobornyl methacrylate, Ethyl trimethylbenzoyl phenylphosphinate, Bis(methacryloyloxyethyl) phosphate.
PaO: 12 M (5 ml)
Warnings: Keep out of reach of children. Avoid contact with skin and eyes. May cause allergic skin reaction. Causes skin irritation. In case of adverse reaction discontinue use of the product. In case of contact with eyes, rinse immediately with water and seek medical advice. Do not swallow. If swallowed, do not induce vomiting but seek medical advice and show the product. Keep container well closed after use, in a suitable cool and dry place, away from sources of artificial or direct sunlight and away from heat sources.
How to use: Apply the product, always avoiding touching the skin and cuticles, then polymerise in the LED/UV lamp for 60 seconds.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
ULTRA BOND
Methacrylic Acid, Aqua.
PaO: 12 M (6 ml)
Warnings: Only for professional use. Keep out of reach of children. Avoid contact with skin and eyes. May cause allergic skin reaction. May cause severe skin irritation. In case of adverse reaction discontinue use of the product. In case of contact with eyes, rinse immediately with water and seek medical advice. Do not swallow. If swallowed, do not induce vomiting but seek medical advice and show the product. Keep container well closed after use, in a suitable cool and dry place, away from sources of artificial or direct sunlight and away from heat sources.
How to use: Apply a light layer of product to the surface of the nail before applying the base coat, taking care not to touch the skin and cuticles. Allow to air dry for 30 seconds. Does not require a UV lamp.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
NAIL PROP
Isopropyl Alcohol, Ethyl Acetate, Isobutyl Acetate.
PaO: 12 M (6 ml)
Warnings: Tenere fuori dalla portata dei bambini. Evitare il contatto con la pelle ed occhi. Può provocare una reazione allergica cutanea. Provoca irritazione cutanea. In caso di reazione avversa sospendere l’uso del prodotto. In caso di contatto con gli occhi, sciacquare immediatamente con acqua e consultare un medico. Non ingerire. In caso di ingestione non provocare il vomito ma consultare un medico e mostrare il prodotto. Tenere il contenitore ben chiuso dopo l’uso, in ambiente adeguato, fresco e asciutto, lontano da fonti di luce artificiale o diretta del sole e da fonti di calore.
How to use: Apply the product to the nail surface, taking care not to touch skin and cuticles, then leave to air dry for 30 seconds. Nail Prep does not require a UV lamp.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
GEL POLISH
N.7: Polyurethane-57, Benzyl Methacrylate, Isobornyl Methacrylate, Trimethylolpropane Trimethacrylate, Peg-9 Dimethacrylate, Silica, Ethyl Trimethylbenzoyl Phenylphosphinate, CI 77891 (Titanium Dioxide), CI 77491 (Iron Oxides).
N.24: Polyurethane-57, Benzyl Methacrylate, Isobornyl methacrylate, Trimethylolpropane trimethacrylate, Peg-9 dimethacrylate, Silica, Ethyl trimethylbenzoyl phenylphosphinate, Bht, CI 15850 (Red 6), CI 15850 (Red 7).
PaO: 36 M (5 ml)
Warnings: Keep out of reach of children. Avoid contact with skin and eyes. May cause allergic skin reaction. Causes skin irritation. In case of adverse reaction discontinue use of the product. In case of contact with eyes, rinse immediately with water and seek medical advice. Do not swallow. If swallowed, do not induce vomiting but seek medical advice and show the product. Keep container well closed after use, in a suitable cool and dry place, away from sources of artificial or direct sunlight and away from heat sources.
How to use: Apply a thin, even layer on the surface of the nail after shaking the pack well, taking care not to touch the skin and cuticles. Polymerise for 120 seconds under UV lamp or 90 seconds under LED lamp. If necessary repeat the operation.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
Do you want to know how to correctly dispose of our packaging? (FR: Indications pour la collecte sélective) Show more >
KIT DE MANICURA Y SEMIPERMANENTE
